€83.90*
Available, delivery time: 2-4 days
Membrane pressure tank made of deep-drawn and welded steel sheet.
Stainless steel connection fitting 1/4".
The upper part of the tank is lined with polyethylene. The separating membrane is made of butyl. Since there is only a direct seal between the air and water sides inside the tank, and equal pressure conditions exist there, the risk of air loss is very low. This issue is significantly greater in conventional tanks, which typically seal the air and water sides against the outer shell of the tank.
There is no contact between the product water and the outer casing.
Maximum working pressure is 6 bar. Pre-charge from 0.5 bar gross, 8 liters; usable volume approximately 3-5 liters depending on the chosen pre-charge and shut-off pressure.